SLX Wireless Systems feature the Shure patented Audio Reference Companding for clear sound beyond the limits of conventional wireless technology.
System Includes:
(1) SLX2 Handheld Transmitter with BETA 58 Mic Cartridge
(1) SLX4 Diversity Receiver
SLX2 Handheld Transmitter with BETA 58A Mic Cartridge(1)
SLX® Wireless Systems feature a wide variety of industry-standard handheld vocal microphones. SLX Wireless Handheld Transmitters includes timed backlit LCD display, frequency and power lockout, and "Mute" functionality. The transmitter design includes interchangeable BETA 58A microphone cartridge.
Features:
• Automatic Transmitter Setup
• Backlit LCD with timeout feature
• Frequency and power lockout
• 3-segment battery fuel gauge
• 2 AA batteries (included) provide 8 hours of continuous use
• 470 - 782 MHz operating range
• Interchangeable cartridges: Beta 58A®
Specifications:
• Audio Input Level
+2 dBV maximum at -10dB position
-8 dBV maximum at 0dB position
• Gain Adjustment Range: 10dB
• RF Transmitter Output: 30 mW maximum (dependent on applicable country regulations)
• Dimensions (including SM58 cartridge): 254 mm x 51 mm dia. (10 x 2 in.)
• Weight: 290 grams (10.2 oz.) without batteries
• Housing: Molded PC/ABS handle and battery cup
• Power Requirements: 2 AA size alkaline or rechargeable batteries
• Battery Life: >8 hours (alkaline)
SLX4 Diversity Receiver (1)
The SLX4 receiver brings unprecedented ease of use to wireless with Automatic Frequency Selection and Automatic Transmitter Setup. For use with SLX Wireless.
With included rack hardware and detachable antennas, it is ready for immediate installation right out of the box.
SLX Wireless Systems feature the patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.
• Automatic Frequency Selection
• Automatic Transmitter Setup
• 960 Selectable frequencies across 24 MHz bandwidth
• Detachable 1/4 wave antennas
• Microprocessor-controlled diversity
• RF presence LED
• 5-segment audio meter
• Multi-function, backlit LCD
• Low battery indicator
• Frequency and power lockout
• Rugged metal chassis
• Volume control on rear of unit
• 1/2 rack design
• Furnished rack hardware
• Non-slip bumpers for use out of rack
• XLR and 1/4" outputs
Specifications:
• Audio Output Level (ref. +/– 38 kHz deviation with 1 kHz tone)
XLR connector (into 600 Ohm load): –13 dBV
1/4 inch connector (into 3000 Ohm load): –2 dBV
• Output Impedance:
XLR connector: 200 Ohms
1/4 inch connector: 1 kilohm
• XLR output:
Impedance balanced
Pin 1: Ground (cable shield)
Pin 2: Audio
Pin 3: No Audio
• Sensitivity: -105 dBm for 12 dB SINAD, typical • Image Rejection: >70 dB, typical • Power Requirements: 12 to 18 Vdc at 150 mA, supplied by external power supply • Dimensions(HxWxD): 1.65" x 7.76" x 5.28" (42 x 197 x 134mm) • Weight: 1 lb. 13 oz. (816 g) • Housing: Galvanized steel
|
